Pandemic Response

pandemic responsePandemic Response – Phoenix Controls healthcare systems provide immediate room conversions that contain highly contagious disease and assure the integrity of surrounding spaces and their occupants. Activated by either the BMS or a local wall switch mounted external to the room; Theris Pandemic Mode overrides normal control to achieve negative room pressure, drive return valves to shutoff, increase exhaust, and command supply to a predetermined setting including shutoff. Environmental settings for heating, cooling, auxiliary control, humidity, and other parameters can also be configured and activated when the room converts. If an APM2 is wired into the room, a status banner can be displayed on-screen and an audible alarm sounded to alert healthcare staff and provide live data for pressure, ACH, temperature, and humidity.

Once the crisis is past, on command the room can be seamlessly moved to decontamination mode, then reverted to use without down time or lengthy transitions.


Phoenix Controls – Healthcare Solution

2015 0319 HealthcareWith high energy prices and greater consequences for healthcare-associated infections, reliable and effective hospital ventilation is more important today than ever before. The Theris® family of venturi valves is designed specifically for the airflow control needs of hospitals, offering both constant volume (CV) and variable air volume (VAV) systems that are maintenance-free, energy efficient, and provides reliable space pressurization to improve infection control.
Consider these facts linking national healthcare issues to ventilation:Infection Control – Effective October 1, 2008 Medicare will not reimburse hospitals for eleven “Never Events,” some of which are airborne related healthcare-associated infections. Better ventilation means better control of airborne pathogens.

Energy Consumption – Hospitals run 24×7 and are the second largest energy consumers in the U.S. by type of facility. Properly controlled reduced ventilation in unoccupied spaces contributes directly to energy savings.

Environmental Comfort – Improved climate control ensures comfort of medical staff during surgery and enhances overall staff productivity. Additionally, climate control for proper temperature and humidity is essential for both speed of recovery and overall patient satisfaction.

Pandemic Influenza and Emergency Preparedness – OSHA and CDC studies show that there is not enough isolation rooms for a pandemic or for other surge events in the U.S. Patient rooms, Intensive Care Units and Emergency Departments should be designed to convert to isolation or protective environments as needed.

Profitability – Regulations place a great burden on hospital performance and profitability. Reliable and accurate ventilation equipment can improve regulatory compliance, decrease energy and maintenance costs, and reduce liability costs related to healthcare-associated infections.

Theris valves control air volume and directional airflow in the critical spaces of healthcare facilities, such as isolation rooms, operating rooms, in-hospital pharmacies, and patient rooms designed for pandemic events. Theris meets all national and state healthcare engineering regulatory requirements set forth by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) and the American Institute of Architects (AIA).


Lab Design for Sustainable Construction

Lab Design for Sustainable Construction
The design of labs for sustainable construction and operation has become a major driver in the A/E/C industry over the past 10 to 15 years. Most large academic, government and corporate lab clients are looking for sustainable design approaches at a minimum, and third-party certification, such as LEED, in many cases. This sustainable trend is driven heavily by the high construction and operating costs of laboratories and the quick payback potential sustainable design approaches provide for end users.

LEED serves as the most common third-party certification in the U.S. for sustainable design, with other systems such as BREEAM applied in other countries. Many new academic, government and corporate laboratories are required to meet LEED Silver requirements at least. Sustainable laboratories are also a driving force to attract some of the world’s most talented researchers and professors, leading to noted scientific discoveries.

The LEED credit choices related to sustainable sites, water usage and materials are driven less by lab programs and more by typical site/project/owner-specific influences. However, the approach to addressing energy and indoor environmental quality credits is more directly impacted by laboratory operational constraints and regulatory requirements. According to Josh Yacknowitz, PE, LEED AP, Arup, some examples include challenges in getting a high number of energy-conservation credits due to the high fresh air rates and process loads in labs, the utility of doing enhanced commissioning to ensure more robust and better-calibrated MEP systems and difficulty in providing individual thermal and lighting controllability within certain types of open laboratories.

However, to create a sustainable building, the A/E/C firm must consider all aspects–from MEP systems, to lighting, to materials and even the orientation of the building.

Sustainable HVAC/equipment
Energy-efficient technologies are focusing on many significant components. There’s an active discussion about appropriate air change rates in wet labs in occupied and unoccupied modes. While safety remains the critical factor, there’s significant data that indicates labs can reduce air change rates and maintain safe environments. Many institutions actively monitor air quality in labs to control air change rates, which has a positive end result on lab energy use.

Demand-controlled ventilation is a common sustainable solution becoming more prevalent in certain lab types where pollutants of concern are well understood. This ventilation strategy uses sensors to monitor spaces for a range of pollutants, allowing minimum air change rates during unoccupied periods to be reduced when pollutant levels are below some threshold value, saving thermal and fan energy related to once-through air. “The use of fast-acting lab-grade airflow control devices and systems has also become more standardized, and has provided the designer with greater latitude to develop tight environmental control schemes and centralized HVAC systems which are right-sized for the peak anticipated loads,” says Yacknowitz.

In addition, heat recovery on both general and lab exhaust is becoming a more common energy-saving technique. “Ways to minimize the air volumes with strategies like setbacks in unoccupied times or sensors that can monitor the air to adjust the flow allows us to have higher air change rates only when needed, rather than ubiquitously as was done in the past,” says Andrea Love, AIA, LEEP AP, Director of Building Science, Payette.

Five years ago, it was revolutionary to put chilled beam heating and cooling in a lab; the concern was that air wasn’t moving through at the necessary exchange rates. Humidity was also a problem with this type of hydronic heating and cooling system early on. Europeans have used chilled beams for over 10 years, but they don’t have the humidity extremes seen in the U.S. However, today, chilled beam technology has become viable in laboratories, as they are a more efficient use of space than air ducts. And active chilled beams are more widely accepted in laboratory spaces where air recirculation is considered safe. Chilled beams save energy in that they reduce the overall fan energy associated with moving air for cooling. And, when compared to typical all-air systems, they enable greater flexibility, reduce energy and increase comfort, all with a rapid ROI, according to Blake Jackson, AIA, LEED AP, Tsoi/Kobus & Associates Inc.

Labs are also shifting towards decoupling ventilation and space-conditioning air because using air for both is expensive, energy intensive and inefficient. “Filtered fume hoods are gaining traction, as they filter room air of contaminants, releasing the clean air directly back into the space,” says Jackson. This significantly reduces exhaust demand, need for dedicated fume hood exhaust and further reduces concern of cross-contamination should enthalpy wheels be utilized.

Heat pumps are also becoming more commercially viable, according Jackson, as they come in an array of shapes and sizes–from small air-source variable-refrigerant flow (VRF) systems up to large-scale ground-coupled heat-recovery chiller plants. “These are more effective than boilers, because instead of turning fuel into heat, they simply transfer heat from one space to another,” says Jackson.

Other HVAC strategies such as enthalpy wheels for high-efficiency thermal transfer rom exhaust air stream to supply air stream; heat-shift chillers for redistribution of waste heat output from high-energy-load zones to other zones in the building; solar energy and geothermal solutions where land area is available to eliminate carbon fuel-based chillers and boilers are also common in today’s labs.

In addition to HVAC items, low-flow and flow-limiting devices on water fixtures are more widely used in laboratories today. Also, various technologies for managing airflow through fume hoods have become more widely accepted, including such measures as zone presence sensors to reduce face velocity when an operator isn’t present, automatic sash closers and constant face velocity flow control, according to Yacknowitz.

Emerging as an important trend is also a focus on integrating utilities and building technologies into adaptive, reusable and flexible spaces for science. “The concept of adaptive labs is of interest to clients who can remain flexible in their programming over time while lowering replacement costs,” says Bill Harris, Practice Leader, Principal, Perkins+Will.

Systemized utility racks allow laboratory personnel to quickly rearrange laboratory benches to address pressing research needs, instead of engaging in costly and wasteful renovations that would have been the only solution a few years ago. “The programming requirements of our clients can change very quickly, and ultimately, the most sustainable solution for addressing evolutions in the workplace is one that doesn’t require new construction, but instead focuses on adaptability to most efficiently meet their goals,” says Harris.

A/E/C firms are also seeing building management systems (BMS) and related controls becoming more sophisticated as they offer technological solutions to reducing energy consumption, both initially and long term, with significant results.

As energy costs rise and laboratories become more air-tight, Building Envelope Commissioning (BECx) is also becoming more typical, as the envelope will play a greater role in driving energy consumption. “Several products are available to minimize thermal bridging, and greater QA/QC collaboration on projects yields a better product,” says Jackson.


Let the light shine
As lab designers want to make lab spaces more comfortable, they’re addressing features which have historically made laboratories difficult places to work: overly bright light levels and excessive noise. Going back beyond three years, scientists claimed to need 100 footcandles (fc) of light on the bench. The need for energy efficiency has forced the question: Do researchers really need that much light?

The answer, of course, varies from lab to lab, depending on the research conducted. But overall, instead of blanketing a lab with fc, designers use a more targeted design. The new focus is on finding the most efficient combination of task lighting and overhead lighting.

In order to provide an effective and efficient solution, most lab design firms provide ambient (direct/indirect) lighting combined with task lighting at the bench. This approach is a logical means of balancing energy efficiency and visual acuity, as well as the increased emphasis on effective daylighting and the control systems necessary to realize these efficiencies.

Firms have seen an increase in LED light usage. Whereas in the past LEDs were only reserved for “feature lighting due to the high costs, according to Jackson, as their costs continue to fall, LEDs are increasingly being used for ambient lighting, back-of-house lighting and task lighting.

Sustainable materials
Overall, labs are searching for ways to customize their spaces without driving up costs. Many vendors are now able to accommodate these needs by working with designers and researchers to create benches and casework that’s mobile, light, adaptable and highly functional at a reasonable cost. Comfort and safety are important in the laboratory environment as well. “Flooring that meets safety standards and is ergonomically supportive is key,” says Jackson. “We specify finishes that will stand up to the intensity of use, are sustainable (VOC free, recycled content) and are going to perform over the life of the building.”

As with most sustainable construction, materials which have low volatile organic compound (VOC) content are becoming preferred. “This mostly impacts adhesive, paint and finish materials specifications,” says Yacknowitz. The use of low ozone-depleting and global warming potential refrigerants in equipment such as chillers, direct-expansion air conditioners, cold rooms, freezers and ice makers are also quite common in laboratory settings.

A/E/C firms have also observed an increased focus on the materials that go into a building’s facade and how they may impact the overall performance. “Things such as thermal breaks to improve the thermal performance, which were hardly considered three years ago, are now becoming more conventional,” says Love. “There has also been an increasing emphasis on how the facade design may impact the building performance, looking at things like how much glass and where should it be to balance between performance, aesthetics, daylight and the connections between occupants and the exterior,” continues Love.

What’s next for sustainable labs?
Beyond high-efficiency equipment, sustainable materials and improved technologies, the most important contributor to healthier environment is the end user. “Engaging scientists and staff to be more aware of the material and energy consumption of their own spaces encourages the type of efficient operations that are at the center of sustainable projects and performance,” says Harris. Implementing direct feedback and local control, whether at the lab bench, fume hood or office, helps the individual recognize the importance of their personal behavior in defining sustainable outcomes for their workplaces.

Some standard approaches and benchmarks in determining minimum air change rates in laboratory spaces and within fume hood have led to very energy-intensive HVAC systems. “These rates are often prescriptive, typically set by owner safety management in response to a range of values commonly used in the industry,” says Yacknowitz. “There is an opportunity to employ a risk-based approach to determine these minimum rates on a space-by-space basis, which could lead to a significant downsizing of central HVAC systems and resulting energy use.” A risk-based approach will require rigorous methodologies, and direct involvement by safety, facilities and user groups to be effective. The potential capital and operational savings, as well as overall carbon generation, are potentially huge, according to Yacknowitz.

Resiliency is also an increasingly important consideration in sustainable laboratory design. “Today, the conversation considers ‘one-off’ events: natural disasters, power disruption and more,” says Jackson. “In the future, I project needing to consider how a building adapts to these challenges and to climate change over time.”


Nailor Energy Recovery

Nailor’s matching “ULTRA PLUS” energy recovery module has helped us to take energy savings even further while helping to meet the more stringent LEED®  and Municipal energy savings demands. This component provides constant tempered air which not only recovers energy efficiently but also improves indoor air quality (IAQ). It is remotely mounted and connected to the top outside air BTR connection/internal mixing port (interconnecting piping and installation by other). It has been designed to work in conjunction with the Engineered Comfort vertical stack fan coil product offering. The KANAIRE®  module was designed SPECIFICALLY for Multi-Unit residential High-Rise buildings in extreme climates and comes with these standard features: Factory set constant ventilation rate with multiple selection for balanced supply and exhaust, high speed intermittent pure exhaust for up to three bathrooms (100 – 200 CFM); super low noise levels, simple remote exhaust activation; balanced flow rates; auto-defrost and non-recirculating; leak proof washable sensible or enthalpic cores; anti-mold and fungus/bacteria protection; three filter options with a unique quick release hanging system; comes in a rugged compact size (19″ x 19″ x 8.5″ high) and it’s NOT affected by wind or stack effect.

Click here for more product info: NailorEnergyRecovery



Nailor 33SZ (DOAS)

Nailor offers a full range of commercial quality air distribution products. Experience has built a solid reputation for design and engineering excellence, performance, flexibility and creativity. Whether the project uses a factory ready product or requires customization, Nailor is capable and ready to provide a complete solution.

We are pleased to announce the addition of the model series 33SZ, Fan Powered Chilled Water Terminal to our already efficient and flexible terminal unit lineup. The 33SZ is a fan powered terminal that includes a cooling induction coil to use in conjunction with a DOAS (dedicated outdoor air system) and is useful in a variety of commercial applications, such as office spaces, classrooms, critical environments and laboratories.


The 33SZ Series is available in both low profile and standard unit heights. Standard EPIC ECM motors provide the quiet, wide turn down ratios and energy efficiency pioneered by Nailor. Similar in overall construction to the standard fan terminal units, features including electric heat, hot water reheat, 2, 4 and 6 row induction chilled water coils, multiple liner options and low profle design, permit the 33SZ series to provide zone sensible cooling while the dedicated primary inlet delivers ventilation and latent cooling.


Each 33SZ is constructed with heavy gauge galvanized steel and the seemingly small details, like integral drip pans and numerous coil configurations, provide for a reliable, long lasting and flexible product.

  • 20 ga. (1.0) galvanized casing.
  • Available IAQ liner offerings.
  • Ultra-energy efficient ECM with solid state EPIC volume controller.


FPCWT 33SZ Series terminals are constructed with a draw-thru induction chilled water coil.


The unit can be used in a variety of applications ranging from zone sensible cooling, supplemental heating, or even used together with a rooftop AHU to take advantage of economizer modes. Depending on application, the 33SZ provides a universal product in a footprint similar to well established fan powered terminals. Additionally, the ducted discharge can service a larger zone than say, a chilled beam product.


  • More versatile than a chilled beam or standard fan powered terminal.
  • Industry familiar installation and operation.
  • Effective overhead ventilation control.
  • Flexibility with reheat and various control schemes.

Quick Design Features:

An ideal cost effective solution for complying with ASHRAE standard 62.1 ventilation requirements.

  • Designed for use with a dedicated outdoor air system (DOAS air handler)
  • Standard and Low-Profile designs with IAQ liner options.
  • Draw-Thru Induction Coil available in 2, 4 or 6 rows for maximum capacity.
  • Direct Drive Epic Fan Technology®.
  • Airflow capacities* of 200-2000 CFM *Capacities are dictated by cabinet size and available options.
  • Available electric or hot water supplementary heat versions.
  • Integral condensate drip pan as standard; drain pan optional.
  • MERV 8 induced air filters; Ductable Filter Rack optional.
  • Pressure independent primary supply damper with integrated airflow sensor.
  • Flexibility of diffuser selection allows for better turn-down, aesthetic, performance and cost options.
  • Versatility of load diversity for both 33SZ and rooftop units, save energy over typical constant volume systems, such as active chilled beam systems.

Click here for more product info: Nailor33SZ


New Product – Nailor 33 SZ DOAS Box Q Boot (Stealth)

Nailor has launched the 33 SZ DOAS Box Q boot (Stealth) for use on sensible only fan powered boxes. The Q boot has been especially designed for the most demanding applications where premium quality design and performance characteristics are desired.  Utilizing “Stealth” design technology, this DOAS terminal unit has low sound levels that lead the industry.

The Q boot (Stealth) design provides significant reductions in radiated sound levels.

For more information please contact us.


Mixed-Flow Exhaust System: Cut Vibration and Noise

Designing a world-class research facility requires careful planning, right down to the exhaust systems. The Integrative Science Com- plex (ISC) at the Univ. of Oregon, Eugene, is a unique approach to scientific research and technology problem solving, by bring- ing together scientists and researchers with different specialties and disciplines. Because of the nature of the research equipment at ISC, of the two-building ISC facility. Part of his responsibility was the choice of lab- oratory ventilation systems. Since the university’s most recent science building was built, around 1990, a great deal had changed in fume hood exhaust technology. Tepfer came to rely on the experience of Dave Knigh- ton, mechanical engineer on the ISC design project. Knighton had been involved previously on several construction projects there, even the choice of a laboratory workstation exhaust system was critical to the success of the facility. Although the facility was being designed to demanding noise and vibration specifications, ISC laboratory workstations still required venting to the atmosphere, and in such a way that introduced minimal noise and vibration to the new facility or to surrounding buildings. The scanning electron microscopes (SEMs) used in the Univ. of Oregon’s materials science and nanotechnology research efforts, for example, rely on an extremely stable foundation for accurate imaging of microscopic structures and could not tolerate excessive vibration from a workstation exhaust system and still maintain measurement accuracy. In addition, the proximity of the ISC facility to high-use spaces, including other departments and outdoor areas, meant the system had to be quiet.

As planning associate at the Univ. of Oregon, Fred Tepfer is the project planner in charge of the design and had experience with several different types of fume exhaust systems, including mixed-flow impeller exhaust fan systems.
The first of the two buildings to be constructed for the new facility represented a particular challenge for an exhaust system, because the building would be located underground between two existing research buildings. In fact, scientists in these other two buildings had voiced concerns that excessive noise and vibration from the new facility could disrupt their operations. Because the new building would be below grade, the exhaust plume would have to reach that much higher to clear the bound- ary layers of the other buildings.
The below-grade architecture was necessary for maintaining a noise- and vibration-free environment for using sensitive scientific instruments. Knighton explains, “The only available location was the adjacent Dept. of Neuroscience building. Originally, we were going to locate the exhaust fans directly on the roof of that building, adjacent to a penthouse.”
The design team reviewed conventional belt-driven centrifugal exhaust fan installations, but excessive noise ruled out that option. Ultimately, the operational re- quirements were decided by the six SEMs and sensitive photolithography equipment for forming the fine- featured masks of semiconductor devices. Even the smallest amount of vibration can ruin the delicately patterned semiconductor masks.

Mixed-flow impeller technology
Direct drive mixed-flow impeller systems operate on a unique principle of diluting contaminated exhaust
air with unconditioned, outside ambient air via a by- pass mixing plenum and bypass dampers. The diluted process air is accelerated through an optimized dis- charge nozzle/windband where nearly twice as much additional fresh air is entrained into the exhaust plume before leaving the fan assembly. Additional fresh air is entrained into the exhaust plume after it leaves the fan assembly through natural aspiration. The combination of added mass and high discharge velocity minimizes the risk of contaminated exhaust being re-entrained into building fresh air intakes, doors, windows, or other openings.
As an example, a mixed-flow fan moving 80,000 cfm of combined building and bypass air at an exit velocity of 6300 ft/min can send an exhaust air jet plume up to 120 ft high in a 10 mph crosswind. This extremely high velocity exceeds ANSI Z.9.5 Standards by more than twice the minimum recommendation of 3000 FPM. Because up to 170% of free outside air is induced into the exhaust airstream, a substantially greater airflow is possible for a given amount of exhaust providing excellent dilution capabilities and greater effective stack heights over conventional centrifugal fans without additional horsepower.
A typical reduction of $.44 per CFM at $.10/kWh provides an approximate two year R.O.I. Energy consumption for mixed flow fans is about 25% lower than conventional centrifugal fans. Mixed-flow systems are designed to operate continuously and direct drive motor bearings can reasonably be expected to last 100,000 hours. The system’s mixed flow wheel make it ideally suited for constant volume or variable air volume (VAV) applications, along with built-in redundancy, and design flexibility. VAV capabilities are achieved via the bypass mixing plenum or by using variable fre- quency drives to provide optimum energy savings.

Installation worries
The main 44-in-dia stainless-steel exhaust duct for the new ISC facility runs up a spare shaft for the eleva- tor. Because of the size and capacity of the fans on the roof, there was concern that their vibration might be transmitted through the concrete in the Neuroscience building to the laboratories on the third floor. But those initial concerns appear to be unfounded. “You can stand up there next to the fans and put your hand on them and there’s no vibration,” says Knighton. “Even if they were sitting right on the steel structure, they probably would have been fine.”
Along with the low vibration levels, concerns about noise from the fans were also unfounded. As installed, the 44-in-dia stainless-steel duct runs from the roof down through the elevator shaft to the basement ceiling, then turning and running adjacent to the build- ing’s main entryway stairs (which run from the ground level to the basement).
Knighton admits that he had more than a few sleep- less nights until the startup of the exhaust fans. “As you come down the stairs you can touch the stainless- steel duct—it’s that close,” he explains. “But all you can hear is a faint airflow noise with up to 17,000 cfm being exhausted through the duct when we tested both fans operating at close to their peak capacity, a high rate that would never be used in the building.” He credits the use of mixed-flow impeller technology. “It has to be directly attributable to these mixed-flow fans. It is remarkable when you consider that we avoided the use of sound attenuators at the fans or in the duct.” By avoiding the use of the sound attenuators, the facility realizes greater efficiency from the exhaust system with resulting lower energy usage than systems employing sound suppression.
Two low profile mixed-flow impeller systems (Tri- Stack systems from Strobic Air Corp., Harleysville, Pa.,) were installed with service for multiple laboratories. The success of the installation has brought an unexpected dividend, says Tepfer: “One thing that is interesting about the facility is that it’s attracting interest on the part of the equipment manufacturers; they all want to get their instruments into this space, so they’re ap- proaching us with pretty attractive deals for upgrades and new toys.”
—Paul Livingstone



Nailor EZ Stat Fan Coil Controller

Engineered Comfort offers a full range of commercial quality fan coil products. Experience has built a solid reputation for design and engineering excellence, performance, flexibility and creativity. Whether your project requires a standard or customized design, Engineered Comfort is capable and ready to provide a complete solution.

Having pioneered, in recent years, the introduction of the ultra-energy efficient EC motor to the fan coil market along with the EPIC
Fan Technology, we now are pleased to announce the addition of the EZstat Direct Digital Controls (DDC) to our product line.

The single component DDC fan coil thermostat,
EZstat, has arrived! The EZstat is an all-in-one space mounted fan coil controller ready for standalone or BACnet operation right out of the box. The EZstat includes a wide range of factory configured control sequences for two and four pipe fan coil units. Standalone EZstat operation requires no special programming, software applications, or setup tools to configure and commission. All options can be set by using only the five front panel buttons and the easy- to-read menus in the full color display.

The EZstat possesses a multitude of features and capabilities that make it stand out against its’ competition.
• Cost-effective combination of networking, application, and sensor options
• Drop-in replacement for most antiquated and bulky competitor’s controllers with separate temperature sensors
• Options include two- or four-pipe heating/ cooling, VAV modulating fan control, and two-way On/Off (for heating application, only) or modulating valves.
• Auto 2-pipe changeover when used with a mode sensor
• Colored backlit display which displays temperatures in either °F or °C.

Consider this
The attractive and sleek design is ideal for new
installations or upgrades of older, less capable thermostats.
• EZstat installation requires only mounting the backplate to a wall or electrical box, connecting wires to screw terminals, and plugging the EZstat into the backplate.
• The full color display is easy to read across a room even in bright sunlight.
• The EZstat meets or exceeds BACnet® Application Specific Controller (ASC) specifications in the ANSI/ASHRAE BACnet Standard 135-2008. This enables the controller to integrate seamlessly with either a future or existing BACnet BAS network



Phoenix Controls Now Offers 5-Year Warranty

Approaching a million venturi valves installed worldwide and with a reputation for performance and durability, Phoenix Controls further distances itself from the competition by providing a new standard 5-year warranty on all valve products shipped after January 1, 2014.

The 5-year warranty covers all of Phoenix Controls valves including the Celeris with its 1 second speed of response, the Traccel tracking pair valve, and the Theris extensively used in healthcare applications. In addition to the valve bodies, the warranty covers valve controllers, actuators, and firmware against defects in material and workmanship for a period of sixty (60) months from the date of shipment.

Rich Stakutis, General Manager of Phoenix Controls, says the longer warranty is a “powerful demonstration of confidence” in the valves’ quality. “Our valves have stood the test of time, they are durable and reliable. We have valves that have been installed for 20+ years and are still delivering the same performance today that they did on the day they were installed.”

Phoenix Controls manufactures and markets air control solutions for room pressurization and airflow in critical spaces. The valves are virtually maintenance free and used extensively in wet chemistry labs, healthcare settings, pharmaceutical, and animal holding facilities, For more information please visit

Phoenix Controls is a business of Honeywell International, Inc. and Phoenix Controls is a registered trademark of Honeywell International, Inc. Phoenix Controls Quality Management System is registered to ISO 9001:2008. Phoenix Controls valves are OSHPD Seismic Certification Preapproved and calibrated on air stations NVLAP Accredited (Lab Code 200992- 0), a program administered by NIST.


Strobic Air Corporation

Strobic Air Corporation, a recognized technological leader in the air movement industry, specializes in technologically advanced exhaust systems for laboratory fume hoods in university, public health, government, chemical, pharmaceutical, industrial and other process industries.  read more



As the recognized leader in the field of air moving equipment, Aerovent has earned a reputation for quickly adapting to the needs of the industry.  read more


Aircuity Upgrade Path Answers Windows XP Concerns

Aircuity says clients have asked for Windows 7 upgrades since Microsoft recently discontinued support of the Windows XP operating system. Aircuity is offering a software upgrade, but also explains that their IMS services function as an Aicuity anouncementembedded controller, not a personal computer, so most of the security concerns are unfounded:

  • Many of the applications on a personal computer that are susceptible to attack by a virus or hackers are simply not installed on the IMS.
  • Many of the ports that are vulnerable on a PC are closed on the IMS, which significantly reduces these risks
  • Most importantly, the IMS is not used as an email or a web client, which could provide a means for malicious files to infiltrate the computer

That all said, to be responsive to its clients Aircuity will ship all new equipment with Windows 7 and offers a path for “voluntary upgrades” of existing equipment. Click for the full Aircuity Sales Bulletin or contact your MEG representative to the best path for you and your clients.


USAMRICD, Aberdeen Proving Grounds

The United States Army Medical Research Institute of Chemical Defense (USAMRICD) is the nation’s leading science and technology laboratory in the area of medical chemical countermeasures.  read more


Johns Hopkins School of Medicine Broadway Research Building

The Broadway Research Building (BRB) houses one of the largest vivarium spaces in the world.  read more


George Washington University Science and Engineering Hall

This 500,000-square-foot, 14-story complex provides research space, teaching labs, common areas, administrative and faculty office space to support multi-discipline research.  read more


Radford University Center for the Sciences

The new Center for the Sciences is a 115,000 gsf building that houses anthropological Sciences and forensics Science research.  read more



Metropolitan Equipment Group was instrumental in design process as well as providing on-site technical resources to provide state of the art wet chemistry laboratories, vivariums, BSL2 and BSL3 spaces.  read more

Share, Digital Realty Trust, and RagingWire – New Data Center Building – Ashburn, Va

In these Data Centers, Metropolitan Equipment Group has provided large custom outside air intakes for free cooling of the data centers.  read more


Google DC – Washington, DC

Saving energy and providing a comfortable indoor environment.  read more


7700 Arlington Blvd. – Arlington, VA

Metropolitan Equipment Group assisted in designing a solution that offered a Halton Energy Recovery unit which recovers energy of the kitchen exhaust  read more


Potomac Yard Marriott – Arlington, VA

Halton Ecology Units were applied on this project to allow the kitchen exhaust to be relieved through a sidewall of the building without exhausting objectionable odors.  read more


UMB – John and Frances Angelos Law Center – Baltimore, MD

The project included 12 floors not including the street and garden level, with offices, classrooms, libraries, auditoriums and courtrooms.  read more


Malone Hall – Johns Hopkins University – Baltimore, MD

Malone Hall will house the recently announced Hopkins Extreme Materials Institute.  read more


Johns Hopkins Hospital – New Clinical Building – Baltimore, MD

The Clinical Building encompassed over 9 miles of acoustical flex duct and over 1200 spin-in access doors.  read more


Fairfax County 911 Call Center – Fairfax, VA

Metropolitan received a request for support involving a safety situation at 911 call center.  read more